AMX PTM-D15 Product Catalog page 55

N E T L I N X H U B C A R D S A N D M O D U L E S
NXC-NH NetLinx ICSNet Hub Cards, NXC-HS NetLinx ICSHub Server Cards and NXC-HE NetLinx ICSHub Expander Cards are
key components to comprehensive, far-reaching AMX control. These cards and modules are engineered to seamlessly distribute
ICSP (Internet Control System Protocol) data and NetLinx ICSNet control throughout the NetLinx Control System.
NetLinx ICSNet Hub Cards, ICSHub Server Cards and ICSHub Expander Cards can extend control up to 1,000 feet. By fully
regenerating data at every distribution point, the Cards and Hubs create control systems of virtually any size over long distances.
Hub Cards are available with NetLinx Integrated Controllers and CardFrames, as well as in a Module enclosure (NXS-MHS
NetLinx Master/Hub Module Shell) for stand-alone operation.
The NXC-NH NetLinx ICSNet Hub Card provides eight ICSNet ports.
FEATURES
Distributes ICSNet data and power to other NetLinx devices
•
Manages up to 8 independent ICSNet wiring runs using Echelon technology
•
Handles wiring runs of up to 1,000 feet for each ICSNet run
•
Links to NetLinx Master and Hubs via ICSHub networking
•
Accepts ICSHub data, regenerates new ICSHub data link for up to 1,000 feet
•
Employs industry-standard CAT-5 wiring and connections
•
Available to install in NXF NetLinx CardFrame, NXI or in NXS-MHS
•
Module enclosure
REAR PANEL
PWR: 2-pin 12 VDC power terminal
•
ICSNet: Eight RJ-45 jacks for ICSNet data and power, green LED flashes when
•
receiving data
ICSHub: In and Out RJ-45 jacks for ICSHub data and power, yellow LED flashes
•
when receiving data
ENCLOSURE:
Metal with black matte finish
•
DIMENSIONS (HWD):
1.5"x5.0"x8.8" (45 mm x 127 mm x 224 mm)
•
WEIGHT:
26 oz (737 g)
•
For more information about AMX products and services visit www.amx.com
11-03
NXC-NH
NetLinx ICSNet Hub Card
FG2060
The NXC-HE ICSHub Expander Card can be used as an ICS hub cable extender
where runs between ICS hubs are more than 1,000 feet. The NXC-HE Card can
also be used in place of a Master Card in a NXI NetLinx Integrated Controller or
NXF (CardFrame) to be used as slave devices.
FEATURES
Links to NetLinx Master and Hubs via ICSHub networking
•
Available to install in NXF NetLinx CardFrame or NXI Integrated Controller
•
REAR PANEL
PWR: 2-pin 12 VDC power terminal
•
ICSHub: Two RJ-45 jacks for ICSHub In/Out data and power, yellow LED flashes
•
when receiving data
ENCLOSURE:
Metal with black matte finish
•
DIMENSIONS (HWD):
1.5"x5.0"x8.8" (45 mm x 127 mm x 224 mm)
•
WEIGHT:
26 oz (737 g)
•
The NXC-HS ICSHub Server Card provides nine ICSHub OUT ports for
connecting NetLinx Controllers and Hubs, and one ICSHub IN port.
FEATURES
Distributes ISCHub data to other NetLinx Master and Hubs
•
Accepts ICSHub data In, regenerates new ICSHub data Out for up to 1,000 feet
•
REAR PANEL
PWR: 2-pin 12 VDC power terminal
•
ICSHub Out: 8 RJ-45 jacks for ICSHub data and power, yellow LED flashes when
•
receiving data
ICSHub: In and Out RJ-45 jacks for ICSHub data and power, yellow LED flashes
•
when receiving data
ENCLOSURE:
Metal with black matte finish
•
DIMENSIONS (HWD):
1.5"x5.0"x8.8" (45 mm x 127 mm x 224 mm)
•
WEIGHT:
26 oz (737 g)
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
NXC-HE
NetLinx ICSHub Expander Card
FG2062
NXC-HS
NetLinx ICSHub Server Card
FG2061