A X C E S S C O N T A C T C L O S U R E C A R D S
Devices that require a simple momentary or latching contact closure can be
controlled with the AXC-REL8 Universal Eight Relay Card. This card can
operate up to 8 relay-controlled functions, and cards can be linked together to
allow a larger number of functions. Adjacent relays on the card may be
selectively commoned to reduce device wiring.
APPLICATION
Universal relay control; eight relays per card
•
CONTROL PORTS
Eight relays, normally open, rated at 750 mA, 28 VAC/24 VDC
•
INCLUDES
Eight channel status LEDs
•
Eight micro-jumpers connect commons between adjacent channels
•
Eight micro-jumpers change relay contacts from normally open to normally closed
•
POWER REQUIREMENT:
150 mA @ 12 VDC
Devices that require a simple momentary or latching contact closure can be
controlled with the AXC-REL14 Universal Fourteen Relay Card. This card
operates up to 14 relay-controlled functions in a dual seven-relay
configuration. Each section of seven relays on the AXC-REL14 are commoned
and both sections may be commoned together.
APPLICATION
Relay control; 14 relays per card, one group of 14 relays or two groups of 7 relays
•
CONTROL PORTS
14 relays, normally open, rated at 750 mA, 28 VAC/24 VDC
•
Each group of seven relays shares the same common
•
INCLUDES
14 channel status LEDs
•
One micro-jumper connects commons between groups 1-7 and 8-14
•
POWER REQUIREMENT:
150 mA @ 12 VDC
Kodak SAV series of 35mm slide projectors are very popular presentation
devices in the international business community. The AXC-SAV Slide Card
provides commands for forward, reverse, focus in, focus out and power.
Two additional relays, Aux 1 and Aux 2, are provided for optional control
requirements. The power relay may be used with the AMX PC1 for 110 VAC
applications of the AMX UPC20 for 110/220 VAC use.
APPLICATION
Relay control of Kodak SAV-style slide projector
CONTROL PORTS
Five relays for Forward, Reverse, Focus in, Focus out and Power on/off
Two auxiliary relay channels for special applications
INCLUDES
Seven channel status LEDs
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
AXC-REL8
8 Relay Card
FG715
AXC-REL14
14 Relay Card
FG716
AXC-SAV
SAV Slide Projector Control Card
(SAV series)
FG721
A U D I O C O N T R O L C A R D S
The AXC-VOL 2-Channel Volume Control Card provides stereo or dual mono
channel control and is programmable for up to 32 preset levels. Ramp speed is
also programmable. To accommodate both professional and consumer devices,
the card accepts either balanced or unbalanced audio connections. Output
levels for each channel can be displayed on AMX Softwire Panels and/or Touch
Panels for monitoring during operation.
APPLICATION
Stereo or two-channel mono opto-isolated line-level audio level control
•
AUDIO PORTS
Two line-level volume control channels, balanced or unbalanced operation
•
0 to -72 dB attenuation, 128-step range, THD at less than 0.008[[[%]]]
•
Nominal input level from -10 to +4 dBm
•
INCLUDES
Two status LEDs for channel 1 or 2 level change
•
Two micro-jumpers for 600 ohm termination
•
Two potentiometers for audio gain adjustment
•
AXC-VOL
2-Channel Volume Control Card
FG755
For more information about AMX products and services visit www.amx.com
11-03