Installing The Touch Panel; Overview; Mounting The Touch Panels; Axu-Cv (/Pb), Axu-Ca (/Pb) - AMX AXT-CV TiltScreen CATP Instruction Manual

Figure 4
AXU-CV (/PB) or AXU-CA
(/PB) and low-profile back
box
Color Active Touch Panels

Installing the Touch Panel

Overview

The section describes how to mount, wire, and clean CATPs.

Mounting the Touch Panels

The following describes how to mount the UniMount and Rack-Mount CATPs. The
TiltScreen CATP can be mounted on any flat surface.
AXU-CV (/PB), AXU-CA (/PB), and low-profile back box
Mount the AXU-CV (/PB), AXU-CA (/PB), and low-profile back box (Figure 4):
1.
Make a cutout in the surface according to the dimensions shown in Figure 5
for a low-profile back box.
Low-profile back box
AXU-CV (/PB)
or AXU-CA
(/PB) bezel
Engraved overlay
Release slot
Installing the Touch Panel 5