D A T A C O N T R O L L E R S
While this controller can serve as a conventional RS-232/422 control port, it
is also able to run its own Axcess application program – an exclusive AMX
product feature. Source specific programming, such as video switchers,
laserdisc players and video codecs, can be handled by the AXB-232++ to
deliver a modular solution for system programming.
CONTROL PORT
RS-232/422/485 port (300-115,200 baud), XON/XOFF, CTS/RTS
•
BUFFERS
1,000 byte serial input buffer; 1,000 byte AXLink buffer
•
INDICATORS
Three status LEDs indicate transmit, receive, and AXLink
•
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD):
1.51" x 5.55" x 5.45" (38 mm x 140 mm x 140 mm)
WEIGHT:
1.1 lbs (499 g)
OPTIONS
AC-RK Accessory Rack Kit
•
CC-232 Control Cable
•
The AXB-DMX512 creates a bi-directional DMX512-to-AXLink connection,
transmitting and receiving up to 512 DMX channels. Onboard processing and
memory create as many as 96 channel groups, eight faders, and 72 presets
(284 by adding extended memory), as well as soft-patch channels. A DMX
lighting board can operate in tandem with the AXB-DMX512, generate levels
for storing presets, or bypass the AXB-DMX512 for direct control of channels.
CONTROL PORTS
DMX512 transmit and receive
•
INCLUDES
Front-panel setup switches and status LEDs
•
Internal jumper select AXLink or RS-232 operation
•
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD):
1.51" x 5.55" x 5.45"
(38.4 mm x 141 mm x 138.4 mm)
WEIGHT:
1.1 lbs (499 g)
OPTIONS
AC-RK Accessory Rack Kit
•
For more information about AMX products and services visit www.amx.com
11-03
AXB-232++
RS-232/422 Interface
(enhanced functionality)
FG5761-10
AXB-DMX512
DMX512 Interface
FG5927
The AXB-DTMF+ provides a compete telephone control interface for AMX
systems. In addition to the transmission and reception of DTMF tones, the unit
can detect whether the line or extension phone is off-hook, recognize
distinctive ring patterns, check for incoming calls, and monitor Caller ID data.
CONTROL PORTS
Phone line RJ-11 jack, extension line RJ-11 jack
•
RCA unbalanced line-level audio in and out with input level adjustment
•
INCLUDES
Front-panel setup switches and status LEDs
•
Micro-jumpers for auto-answer mode and line type
•
ENCLOSURE: Metal with black matte finish
DIMENSIONS (HWD):
1.51" x 5.55" x 6.45"
(38.4 mm x 141 mm x 163.8 mm)
WEIGHT:
1 lb (454 g)
OPTIONS
AC-RK Accessory Rack Kit
•
The AXB-IRS4 operates as an AXLink bus device or as an independent RS-232-
to-IR interface. The four IR ports can be set up for IR or wired serial operation.
Any two ports can send commands at the same time; internal firmware stacks
any remaining IR pulses and executes them in sequence. Each unit emulates
four AXLink devices.
CONTROL PORTS
Four IR/serial ports
•
One AXLink or one RS-232 port (300–19,200 baud) to receive
•
external control commands
INCLUDES
Battery-backed IR memory, up to 200 commands per port
•
Front-panel setup switches and status LEDs
•
Two CC-IRC or CC-SER emitters
•
ENCLOSURE:
Metal with black matte finish
DIMENSIONS (HWD):
1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT:
1.1 lbs (499 g)
OPTIONS
AC-RK Accessory Rack Kit
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
AXB-DTMF+
DTMF Interface
FG946
AXB-IRS4
IR/Serial Interface, 4 Ports
FG5914