AMX PTM-D15 Product Catalog page 104

L A N D M A R K
L A N D M A R K C A R D F R A M E S
PLB-CF10
Cardframe with 10 Card Slots and 16 Port Hub
FG993
FEATURES
Holds up to 10 control cards
•
Acts as system master with Master Control Card
•
Operates interactively over high-speed Ethernet connection to system PC with
•
PHAST software and PLC-MCU Card
Distributes PHASTLink from 15-port PHASTLink data hub
•
CARD SLOTS
10 rear-access slots
•
HUB LINK
2 RJ-45 ports to hubs and Cardframes
•
PHASTLINK
15 RJ-45 PHASTLink ports
•
DIP SWITCH
Sets Cardframe device number
•
DIMENSIONS (HWD):
5.56" x 17.13" x 15.25"
(141.2 mm x 435.1 mm x 387.4 mm)
WEIGHT:
19.8 lbs (9.0 kg) (w/o cards)
POWER:
110/220 VAC, 50/60 Hz, 100 mA (w/o cards)
ACCESSORIES
PM-RAC Rack-Mount Kit, requires 3 rack spaces (5.25")
•
PLB-CF2
Cardframe with 2 Slots
FG718
FEATURES
Holds up to two control cards
•
Acts as system master (with MCU card) or adds two control cards to an
•
existing system
Operates interactively over high-speed Ethernet connection to system PC
•
with PHAST software (with MCU card)
Distributes control from PHASTLink ports, supports up to 10 devices and
•
one keypad in Master mode
CARD SLOTS
Two rear-access slots
•
PHASTLINK
Two RJ-45 ports
•
DIP SWITCH
Sets Cardframe device number
•
LED INDICATORS:
Red Link LED on front
•
Red Power LED on front
•
Green Data LED on back
•
Red DIAG (diagnostic) LED on back
•
DIMENSIONS (HWD):
2.0" x 6.3" x 13.5" (50 mm x 159 mm x 336 mm)
WEIGHT:
3.5 lbs (1.6 kg) w/o card
POWER:
40 mA w/o cards, 1.5 A 12 VDC power supply included
ACCESSORIES
PM-RAC2 PLB-CF2 Rack-Mount Kit (holds 2)
•
For more information about AMX products and services visit www.amx.com
11-03
L A N D M A R K M A S T E R C A R D S
PLC-MCU4
4MB Master Control Card
FG754
APPLICATION
Master system processing and memory one required per system
•
PHASTLAN
RJ-45 Ethernet 10baseT port to system PC
•
MEMORY
4MB Flash
•
4MB SRAM
•
POWER:
480 mA
L A N D M A R K C O N T R O L C A R D S
PLC-AMX
AMX Emulation Card
FG0751
APPLICATION
Link up to 255 Axcess devices
•
AXLINK
4-pin AXLink data/power bus
•
PROGRAM
9-pin male D-Sub programming connector
•
POWER
130 mA (card itself, additional power may be needed for devices)
•
PLC-IN7
7-Contact Input Card
FG0741
APPLICATION
Sense closures or TTL voltage changes
•
INPUTS
1-7: 7 inputs, closure or 0–5 VDC voltage change
•
POWER
+12 and +5 VDC power for accessories, 1 A max
•
WIRING
16-pin screw terminal
•
POWER
25 mA (May need additional power to operate connected devices)
•
PLC-IRIN
IR Input Card
FG0729
APPLICATION
Accepts Landmark IR commands from up to 3 sensors
•
IR IN 1–3
Three inputs for industry-standard IR sensors
•
WIRING
Three 3-pin screw terminals for sensor data and power
•
POWER
45 mA
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.