AMX PTM-D15 Product Catalog page 94

A X C E S S D A T A C O N T R O L C A R D S
Most audiovisual devices, such as audio and video cassette recorders, compact
disc players and tuners, can be remotely controlled by either infrared (IR) or
serial data commands. The AXC-IR/S Infrared Serial Card generates
programmed commands specific to each device by manufacturer, model
number and function. Up to 128 functions can be programmed into each card.
As needs and technology change, existing cards can be reprogrammed and
new cards can be added to the system. One Infrared/Serial Card is required for
each device.
APPLICATION
Stores and transmits IR and IR/serial control commands
•
Commands stored in non-volatile memory
•
CONTROL PORT
IR control port with IR emitter and IR/serial connections
•
INCLUDES
One status LED for transmit
•
One micro-jumper sets card for No Carrier or Normal operation
•
One CC-IRC or CC-SER control cable
•
POWER REQUIREMENT:
45mA @ 12 VDC
The AXC-MIDI MIDI Interface Card provides control to the following devices for
integration with other studio devices such as lights, volume and non-MIDI
devices: Music keyboards, mixers, electronic instruments, equalizers, routing
switchers, recording/reproducing decks, computers and control systems.
APPLICATION
Controls mixers, equalizers and other devices that use MIDI communication
•
CONTROL PORTS
MIDI In, Out and Through
•
INCLUDES
Three status LEDs for MIDI In, Out and Thru Cable for MIDI Out
•
POWER REQUIREMENT:
20 mA @ 12VDC
Audio/visual events, multi-image presentations and multi-scene lighting events
require a standardized method of synchronization for material during
presentations and performances. The Society of Motion Picture and Television
Engineers (SMPTE) has formulated an industry-wide standard by creating a
digital encoding/decoding process. The AXC-SMP SMPTE Time Code Card
can receive time code from any audio source such as videotape, audio reel-to-
reel and cassette decks. This allows precise, simultaneous operation of Axcess
functions and other events.
APPLICATION
Sends and receives SMPTE time codes using line-level audio
•
1/10 second accuracy
•
CONTROL PORT
SMPTE input and output
•
INCLUDES
Two status LEDs for transmit and receive
•
POWER REQUIREMENT:
45 mA @ 12 VDC
For more information about AMX products and services visit www.amx.com
11-03
AXC-IR/S
IR/Serial Card
FG740
AXC-MIDI
MIDI Interface Card
(Musical Instrument Digital Interface)
FG745-K
AXC-SMP
SMPTE Time Code Card
FG744
A X C E S S C O N T A C T C L O S U R E C A R D S
The AXC-INP8 Switch Opto Voltage Input Card provides eight inputs that can
respond to switch closures or voltage level (high/low) changes. Input signals
may originate from tape transports, limit switches, foot mats or the AMX PCS
Power Current Sensor. Each input may be set for either switch closure (SW) or
voltage operation (VO), allowing a combination of either application on the
same AXC-INP8 card. Inputs set to the switch mode share the same Axcess
system ground. When an input is set to voltage mode, it is opto-isolated from
the system and can accept AC or either polarity DC signals.
APPLICATION
Receives switch closures or logic high-/low-frequency level changes
•
CONTROL PORTS
Eight input channels, 28 VDC or 24 VAC maximum
•
Input closures act as Axcess channel Push or Release
•
Voltage level below 1.5 V is read as a logic low (Push or On)
•
Inputs set to voltage operation are opto-isolated
•
INCLUDES
Eight channel status LEDs
•
Eight pairs of micro-jumpers change channels from switch to voltage operation
•
The AXC-SLD Slide Projector Control Card provides commands for forward,
reverse, focus in and focus out. With the optional AMX PC1 Power Controller,
this card also provides AC Power on/off. Each projector requires one card, and
up to 255 slide projectors can be controlled in one system with additional AMX
CardFrames and cards. The AMX-SLD is designed for the Kodak series of
slide projectors. It may also be used with compatible models. Two extra AUX
relays are provided for additional user controls.
APPLICATION
Relay control of US Kodak-style slide projector
•
CONTROL PORTS
Five relays for Forward, Reverse, Focus in, Focus out and Power on/off
•
Two auxiliary relay channels for special applications
•
INCLUDES
Seven channel status LEDs
•
One Kodak-style EBY control cable
•
POWER REQUIREMENT:
50 mA @ 12 VDC (card only)
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
AXC-INP8
8 Input Card
FG785
AXC-SLD
Slide Projector Control Card
(US Kodak ® series)
FG720-K