AMX PTM-D15 Product Catalog page 81

R A D I A D I M M E R M O D U L E S
RDM-INC
Incandescent Dimmer Module, 2,400 W
FG606-30
APPLICATION
20A Incandescent-compatible dimming
•
General-purpose switching, no positive air gap
•
40A SCR, 350 microsecond rise time choke
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-2INC
Dual Incandescent Dimmer Module, 2,400 W (x2)
FG606-31
APPLICATION
Dual-channel 20A Incandescent-compatible dimming
•
General-purpose switching
•
Dual-channel 40A SCR, 350 microsecond rise time chokes
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-INC50
Incandescent Dimmer Module, 6,000 W
FG606-32
APPLICATION
50A Incandescent-compatible dimming
•
General-purpose switching, no positive air gap
•
50A SCR and 500 microsecond rise time choke
•
Installs in two enclosure spaces
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-MDM
Multi-mode Dimmer Module, 2,400 W
FG606-36
APPLICATION
Versatile 20A "dimming construction set" adapts to operate most fixtures,
•
includes:
Solid-state 40A SCR
-
Positive air-gap general-purpose 20A relay
-
350 microsecond choke
-
Load resistor
-
Provides high-wattage (1920–6000W) level control of dimmable fixtures
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
RDM-DC
DC Module, 1,920 W, 0-12 VDC
FG606-60
Application
Dims one circuit DC-controlled electronic fluorescent ballasts
•
Ramps 0–12 VDC signal for level control
•
One 20A Positive air gap relays for power
•
Current sinking
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-2DC
Dual DC Module, 1,920 W (x2), 0-12 VDC
FG606-61
APPLICATION
Dims two circuits DC-controlled electronic fluorescent ballasts
•
Ramps 0–12 VDC signal for level control
•
Dual 20A Positive air gap relays for power
•
Current sinking
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-3DC
Triple DC Module, 1,920 W (x3), 0-12 VDC
FG606-62
APPLICATION
Dims three circuits DC-controlled electronic fluorescent ballasts
•
Ramps 0–12 VDC signal for level control
•
Three 20A Positive air gap relays for power
•
Current sinking
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
For more information about AMX products and services visit www.amx.com
11-03