Printer Menu; Table 4-6: Printer Menu Choices; Figure 4-12: Print Menu Items - Honeywell ADEMCO MX8000 Installation And Operation Manual

ENTER
5. Press . Users with an operator profile are done at this point.
MENU
The display reads
Note: This display will only appear if the logged on User has an Installer Profile (see section 4.4.1).
6. Press the or
Note: If you choose Yes all line card and user custom programming will be lost.
4.6.8

Printer Menu

In the print menu you can print
customized reports by the type of alarm,
edit the desired print output, and
configure output for your printer.
Printer Menu Choice 1
Call History
System History
Print Report
System Config
Test Page
Line Card
Statistics
Do you wish to set
to factory default
settings? No
button to toggle No to Yes.
Table 4–6: Printer Menu Choices
Choice 2
Priority 1
(Life safety signals-Fire, Duress)
Priority 2
(Property safety signals-Burg.)
Priority 3
(Supervisory signals)
Priority 4
(Trouble signals)
Priority 5
(All other signals)
Print All
Program Data
Users List
Line Card #
<Installer Menu>
6=Printer Menu
7 Program Menu
8 Diagnostics
<Printer Menu>
1=Print Report
2 Edit Evnt Format
3 Config Printer
Figure 4–12: Print Menu Items
Y Indicates that this item will print on this report.
N Indicates that this item will not print on this
report.
The call History print will execute once you exit
from "Choice 2".
Note: Choice 2 settings are not retained in flash
memory and have to be chosen for each call
history printing.
This option prints all the system events in the
event history buffer.
Print all of the system and line card data described
below under Program Data and Line Card #.
Print just the systems programmed data such as
Operating Mode, Display Options, Communication
Definitions, System Options, and Message Queue
Options.
Print a list of assigned MX8000 Users with their
Level (Installer or Operator) and PIN Number.
Print line card configurations per line card. These
are the items programmed using the Line Card
Menus.
Print a test page.
Print line card statistics which include the device
number, serial number, part number, physical line
number, virtual receiver and line numbers, total
calls for the line, calls today, and number of bad
calls for the line.
Section 4 – Operation
­
¯
Comments
4–11