Honeywell ADEMCO MX8000 Installation And Operation Manual page 92

MX8000 Installation and Operation Guide
Select Line
Device Device
Type Menu
MX8000–
LC1 Edit Line
1 Line (cont'd)
(cont'd)
5–36
Table 5–11: Line Device Menu Options (cont'd)
Choice Choice
Listen In
Line #
(cont'd)
Misc. Line
Options
Choice Choice
Not Used
Common
Listen Mode
PBX
0-255
Timeout
Add Account
Listen In
Edit Account
account edit
Clear Account
Y (Yes)
N (No)
Echo
Suppress
Yes
Caller ID
No
Y (Yes)
Billing Delay
N (No)
Hunt Group 00-99
Default Comments
✔
See page 5–62 for
more information.
Must not be used in
UL installations.
PBX String See page 5–62 for
edit more information.
0 See page 5–63 for
more information.
None See page 5–63 for
more information.
Outputs a 2 second
✔
2025Hz tone to
disable echo
suppression
equipment that may
interfere with modem
formats.
✔
Caller ID to
Automation: When
enabled, Caller ID
information is output to
the automation system
only in the event that
no alarm data is
received from a
security system control
panel.
Caller ID to Printer
Ports: When enabled,
Caller ID information is
output to the printer
port(s) for every call
received at the time
that the Caller ID
information is available
from the Public
Switched Telephone
Network (normally
between the first and
second ring.) This
option should only be
used when connected
to a parallel or serial
printer or equivalent.
Initiates a 2-second
delay at the start of
each call before the
handshake delay.
✔
See page 5–65 for
more information.
Allows multiple line
cards to report under
the same group
00
number to the
automation software.