Table of Contents
Advertisement
Section 5 Programming
This section lists the programmable features in programming mode and the procedures for each of them. The
options available are general options, line card options, and user options.
After you complete your programming of the receiver, it is recommended that you make a
printout of the programmed values for reference. To make a printout of the programmed values,
see "How to Print System Configuration" on page 4–13 and perform a Print All operation.
5.1
UL 864 Programming Requirements
NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION, AND
OTHER INVOLVED PARTIES: This product incorporates field programmable software. In order
for the product to comply with the requirements in the Standard for Control Units and Accessories
for Fire Alarm Systems, UL 864, certain programming features or options must be limited to
specific values or not used at all as indicated below.
Programming Option
Battery Backup Cfg
5.2
How to Enter Program Mode
Follow these steps to enter into program mode:
1. Log on to the receiver (see Section 4.4.4 for log on procedure).
ENTER
2. Press the
MENU
7
3. Press the
button.
4. Select the option you wish to program. (See Section 5.3 for options.)
5.2.1
Programming Fields
In program mode there are three types of programming fields that data can be entered into. Table 5–1 list
the three types of fields and the various parameters associated with them.
Type of Field
Permitted in
UL 864 (Y/N)
Yes
button.
Table 5–1: Types of Programming Fields
Control Keys
Numeric
0
through
or
List
Edit
0
through
or
NOTE
Possible
Settings Permitted in UL 864
Settings
No Battery Bkp
Battery Bkp
DC Bkp
Battery Bkp
Comments
These fields require a numeric entry
9
only.
keys
Predefined choices are put in a list
and can be selected by pressing the
keys
up or down arrow keys.
Enter a number from the numeric
9
keypad or enter any special
characters by pressing the up or
down arrow keys.
keys
5–1
Advertisement
Table of Contents
Troubleshooting
