Figure 5-29: Mx8000-Lc1 Ademco Auto Output Options - Honeywell ADEMCO MX8000 Installation And Operation Manual

5.5.4.6 Ademco Auto Opt.
This selection is used to select the BFSK Auto output of Hi
Speed or 4/2, the 3/1 Restore output of Hi Speed or 3/1, the
4/2 Out Automation Conversion of codes 9, B, C, D, E, and
F of Hi Speed or Normal, combining 3/1 and 4/1 expanded
messages (Pulse Extended), Extended Output format, and
the FBII output of FBII Super Fast or FBII LAR300.
How to Set BFSK Auto Output
1. Follow the procedures in Section 5.5.4.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–
29).
The display Flashes on the BFSK= field.
3. Press the or
4. When the desired setting is flashing press
How to Set 3/1 Restore Output
1. Follow the procedures in Section 5.5.4.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–29).
3. Press the button.
The display Flashes on the 3/1 Rstr= field.
4. Press the or
5. When the desired setting is flashing press
How to Set 4/2 Out
1. Follow the procedures in Section 5.5.4.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–29).
3. Press .
The display Flashes on the 42Out= field.
4. Press the or
5. When the desired setting is flashing press
6. To exit press .
How to Set FBII Out
1. Follow the procedures in Section 5.5.4.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–29).
3. Press
The display Flashes on the FBI= field.
button to change the option from HiSpeed to 4/2 or vice versa.
ENTER
button to change the option from HiSpeed to 3/1 or vice versa.
ENTER
button to change the option from HiSpeed to Normal or vice versa.
ENTER
.
<Edit Line :01>
6 Ademco Auto Opt.
< Exit Menu
BFSK=H/S 3/1Rstr=3/1
42Out=H/S FBI=S/Fast
Pls=Ext
<BFSK AutoOut<=Exit>
Figure 5–29: MX8000–LC1 ADEMCO Auto
.
MENU
.
MENU
.
MENU
Section 5 – Programming
­
ExtOut=H/S
Output Options
5–67