Table of Contents
Advertisement
3. Press
The display Flashes on the Pls= field.
4. Press the
or
5. When the desired setting is flashing press
6. To exit press
.
How to Set Extended Output
Note: This field will only be active when the Pulse Extended option above has been set to Extended.
1. Follow the procedures in Section 5.5.2.
6
2. Press
for Ademco Auto Opt. menu (see Figure 5–20).
3. Press
The display Flashes on the ExtOut= field.
4. Press the
or
5. When the desired setting is flashing press
6. To exit press
.
5.5.2.7
Line Gain Opt.
This selection is used to select the gain for transmit and
receive for a line.
How to Set Transmit Gain
1. Follow the procedures in Section 5.5.2.
7
2. Press
for Line Gain Opt. menu (see Figure 5–21).
The display Flashes on the Xmit= field.
3. Press the
or
gain.
4. When the desired setting is flashing press
How to Set Receive Line Gain
1. Follow the procedures in Section 5.5.2.
7
2. Press
for Line Gain Opt. menu (see Figure 5–21).
3. Press the
button.
The display Flashes on the Rec= field.
4. Press the
or
.
button to change the option from Extended to Not Extended or vice versa.
ENTER
.
button to change the option from High Speed to 4/2 or vice versa.
ENTER
button to change the transmit
ENTER
button to change the receive gain.
.
MENU
.
MENU
<Edit Line :01>
7 Line Gain Opt.
< Exit Menu
Xmit=-8db
Mon=Norm Gain=2.0db
OHGain=7.0db RImp=HI
<TransmitGain<=Exit>
Figure 5–21: MX8000–LC3 Line Gain Options
.
MENU
Section 5 – Programming
Rec=6db
5–51
Advertisement
Table of Contents
Troubleshooting
