System History; System Info; Set Time & Date; Figure 4-8: System History Display Sequence - Honeywell ADEMCO MX8000 Installation And Operation Manual

4.6.4

System History

System history displays any events
that are stored in the history buffer.
System events are any events related
to the receiver operation such as line
card faults, low backup battery, AC
power loss, log in, log out, system
program change, communication
failure to a printer or automation
system, etc.
Note: Up arrow moves back to the
previous event that occurred.
To display a specific event enter the
event number (see Figure 4–8) then
ENTER
press the . Press the
MENU
go to most recent call.
4.6.5

System Info

System Info is a non-editable screen
that displays the model number, the
software revision, software date code,
and receiver ID number. If a down
arrow is pressed, the display will
sequentially show the line card
firmware information, which includes
the firmware part number, the
software date, and letter revision. The
first line card firmware information
display is for a MX8000–LC1 card, the
second display is for a MX8000–LC3
card, and the third display is for a
MX8000–LRR card.
4.6.6 Set Time & Date
If Set Time & Date, is selected the operator can change the time and date currently displayed on the
receiver. (See Figure 4–10 for setting time and date procedure.)
Note: If you make an error while setting the time and/or date, press
Event Number
View after
2 pressed
Up arrow
displays previous
event
✶ ✶ ✶ ✶
to
Figure 4–8: System History Display Sequence
Model Number
Version Number
Date Code
Firmware Part Number
Letter Rev.
Figure 4–9: System Information Display
<Installer Menu>
2=System History
3 System Info
4 Set Time & Date
SysEvent 22 of 22
User Log In
#11
02/03/01 09:56AM
SysEvent 21 of 22
User Log Out
#02
02/03/01
Model: MX8000
Version: XX.XX
Date: MMM D 2002
Rcvr ID: 01
LineCard Firmware:
124047
Date
Date: 10/18/97
Rev: G
LineCard Firmware:
124061
Date: 4/02/02
Rev: B
LineCard Firmware:
124062
Date: 12/10/01
Rev: A
and re-enter the correct value.
Section 4 – Operation
­
¯
09:56AM
¯
MX8000-LC1
¯
MX8000-LC3
¯
MX8000-LRR
¯
4–9