Table of Contents
Advertisement
5.4.1.1
How to change the operation mode
Follow these steps to change the operation mode of the receiver:
1. Log on to the receiver. (See Section 4.4.4 for log on procedure.)
ENTER
2. Press
button.
MENU
7
3. Press
for program menu.
1
4. Press
to choose general options.
1
5. Press
to choose operation mode.
The current operation mode will flash in the display.
6. Press the
or
Note: Each additional press of the up or down arrow key will toggle the operation mode setting to the next
choice.
7. When the display flashes on the desired operation mode press
5.4.2
Display Options
Display options let you customize the visual outputs of the
receiver. These items include language formats, the time
display, how events are sorted to the VFD display, or whether
or not to hold unacknowledged events. Table 5–4 lists the
available choices and gives a description of those choices.
Display Menu
Items
English
Language
Español
AM/PM
Time Display
24 hour
m/d/y
Date Display
d·m·y
y-m-d
Yes
Daylight Savings
No
button to move through the operation mode choices.
Table 5–4: Display Options and Descriptions
Choices
Default
✔
✔
✔
✔
ENTER
MENU
<General Options>
2=Display Options
3 Communications
4 System Options
English AMPM m/d/y
DayLtSv=Y <ITI><FMT>
HoldEvt=N Bright=25%
<Language <=Exit>
Figure 5–5: View of Display Options
See Section 5.4.2.1 for step-by-step instructions.
Not available at this time.
AM/PM is used for 12-hour time clock displays. See Section
5.4.2.2 for step-by-step instructions.
Military time standard. See Section 5.4.2.2 for step-by-step
instructions.
m = month, d = day, and y = year.
See Section 5.4.2.3 for step-by-step instructions.
See Section 5.4.2.4 for step-by-step instructions for selecting the
DST start hour, start month start week, end month, and end week.
Section 5 – Programming
.
Comments
5–7
Advertisement
Table of Contents
Troubleshooting
