Format Numbers Used In Printer Output; Table 6-2: Formats By Report Number - Honeywell ADEMCO MX8000 Installation And Operation Manual

6.2

Format Numbers Used In Printer Output

In a printed report the format used by a calling panel is listed as a number, that number represents a
particular format. Table 6–2 lists these numbers along with the corresponding format.
Format
Number
4 SIA DCS
9 ITI
10 ITI SX-IVA
11 ITI PinPoint
12 ITI RF Commander
13 ITI Pro 1 or ITI Ultragard
14 ITI CareTaker +
15 ITI SX-V
16 ITI Commander 2000
17 ITI HarborGuard
18 ITI Reserved or ITI Simon
19 ITI Vector
20 ITI Hardwire Commander
21 ITI SX-V Special
22 ITI Marsden
23 ITI Network Sec
24 ITI Nutone
25 ITI SX-IVB
30 Pulse Tone 3/1
31 Sescoa Franklin 3/1
32 ADEMCO/Silent Knight 3/1
33 Extended 3/1
35 Pulse tone 4/1
36 Sescoa Franklin 4/1
37 ADEMCO/Silent Knight 4/1
38 Extended 4/1
40 Pulse Tone 4/2
41 ADEMCO/Silent Knight 4/2
43 Extended 4/2
46 Radionics 3/1
47 Radionics 3/1 with Checksum
48 Radionics 4/2 with Checksum
49 Sescoa Superspeed
50 Contact ID
51 ADEMCO TouchTone
52 Acron TouchTone
53 Westec TouchTone
54 ADEMCO Express
• If you are receiving Contact ID ® 10 format on your MX8000 receiver you must use ADEMCO
8000 automation protocol.
• If you are receiving Contact ID ® format on your MX8000 receiver you may use any automation
protocol except the SK9000 automation protocol. The SK9000 automation protocol does not
support Contact ID reporting format.
Table 6–2: Formats By Report Number
Format Type
Format
Number
ADEMCO High Speed (SIA D1) output as SIA events
when using the ADEMCO 8000, SK9000 or ITI
55 Automation Protocol. ADEMCO High Speed output as
raw data (ADEMCO format) when using the 685,
CAPS, or CP220 Automation Protocol.
ADEMCO High Speed with checksum (SIA D1) output
as SIA events when using the ADEMCO 8000,
SK9000 or ITI Automation Protocol. ADEMCO High
56
Speed with checksum output as raw data (ADEMCO
format) when using the 685, CAPS, or CP220
Automation Protocol.
57 ADEMCO DTMF 4/2 with checksum
58 ADEMCO DTMF 4/1 with checksum
59 Acron TouchTone 4 digit account.
60 BFSK
61 Silent Knight FSK0/FSK80
62 Silent Knight FSK1/FSK81
63 Silent Knight FSK2/FSK86
FBII 4/3/1 with checksum or FBII 4/1/2/1 with
64
checksum
65 FBII 4/3/1 or FBII 4/1/2/1
70 Westec 871
71 Westec W970
72 Westec W1000, W2000, W3000
73 Westec 45K
74 Modem II
75 Modem IIe
80 Pulse 32
81 Pulse 32 CS
82 Pulse 41 CS
83 ADEMCO Contact ID® 10-digit Account
100 ITI Simon U
101 Varitech FSK 4/1
102 Varitech FSK 4/2
Ademco High Speed output in high speed raw data
103
(ADEMCO format) when using ADEMCO 8000,
SK9000 or ITI Automation Protocol
Ademco High Speed with checksum output in high
104 speed raw data (ADEMCO format) when using
ADEMCO 8000, SK9000 or ITI Automation Protocol
!WARNING!
Section 5 – Programming
Format Type
6–3