Parameter 58: Format Date - Honeywell FBII CP-220A Hookup And Installation Instructions

PARAMETERS AFFECTING THE CP-220A's SOUNDER OPERATION
PARAMETER
04 SOUNDER
37 MANUAL TURNOFF
OF SOUNDER
57 AUTO MODE
SOUNDER
(ON/OFF)
PARAMETER 58:
Format Date
Contrast the two displays at
the right. The upper display
shows the date, April 29, in
the format used in the
United States. In the lower
display, the same date
places the day before the
month, a format used
widely in Europe and in
many other countries
throughout the world.
Page 2-52 Section 2: Programming the CP-220A CP-220A Central Station Receiver
TITLE
"globally" enables and disables
sounder operation; if enabled,
permits sounder to operate
according to the functions set in
PARAMETER 37 and
PARAMETER 57; if disabled,
sounder will not operate,
regardless of settings in these
affects the sounder's operation in
the CP-220A's MANUAL Mode
only; if enabled, the sounder will
operate continuously when a
message is received; if disabled,
each new message will generate a
2-second beep, which will stop
affects the sounder's operation in
the CP-220A's AUTOMATIC
Mode only; if enabled, the
sounder will operate for 3 seconds
whenever a message is received;
if disabled, the sounder will not
FORMAT DATE MONTH / DAY MM/DD/YY HH:MM:SS
Background:
Conventions in stating the date differ among countries of the world.
PARAMETER 58 allows placement of the month before the day, or the day
before the month. In the United States, of course, it's conventional to place
the month first, as shown below:
11 123 BURGLARY
11 123 BURGLARY
FUNCTION
parameters
automatically
operate at all
04/29/94 13:20:04
29/04/94 13:20:04
Hook-Up and Installation Manual
COMMENTS
see PARAMETERS 37 and 57,
below
if PARAMETER 37 is enabled,
the NEXT key must be pressed to
silence the beep
if PARAMETER 57 is disabled, be
sure the Automation System will
sound an alert for all the
CP-220A's "internal" messages