Change Your Password - ZyXEL Communications GS1920-24 User Manual

Table 5 Navigation Panel Links (continued)
LINK
Errdisable
Private VLAN
Green Ethernet
LLDP
IP Application
Static Routing
DiffServ
DHCP
ARP Setup
Management
Maintenance
Access Control
Diagnostic
Syslog
Cluster
Management
MAC Table
ARP Table
Path MTU Table
Configure Clone
Neighbor Table
4.3.1

Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
Chapter 4 The Web Configurator
DESCRIPTION
This link takes you to a screen where you can configure errdisable settings in CPU
protection, errdisable detect, and errdisable recovery.
This link takes you to a screen where you can configure private VLANs.
This link takes you to a screen where you can configure green Ethernet settings in EEE,
auto power down, abd short reach for each port.
This link takes you to a screen where you can configure LLDP settings.
This link takes you to a screen where you can configure static routes. A static route defines
how the Switch should forward traffic by configuring the TCP/IP parameters manually.
This link takes you to screens where you can enable DiffServ, configure marking rules and
set DSCP-to-IEEE802.1p mappings.
This link takes you to screens where you can configure the DHCP settings.
This link takes you to screens where you can configure the ARP learning settings for each
port.
This link takes you to screens where you can perform firmware and configuration file
maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password and
configure SNMP and remote management.
This link takes you to a screen where you can view system logs and test port(s).
This link takes you to screens where you can setup system logs and a system log server.
This link takes you to screens where you can configure clustering management and view its
status.
This link takes you to a screen where you can view the MAC addresses (and types) of
devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the MAC addresses – IP address
resolution table.
This link takes you to a screen where you can view the path MTU aging time, index,
destination address, MTU, and expire settings.
This link takes you to a screen where you can copy attributes of one port to other ports.
This link takes you to a screen where you can view the IPv6 neighbor table which includes
index, interface, neighbor address, MAC address, status and type.
GS1920 Series User's Guide
37