5.1
Overview
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•
Create a VLAN
•
Set port VLAN ID
•
Configure the Switch IP management address
5.1.1
Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this
with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Initial Setup Network Example: VLAN
Figure 26
Click Advanced Application > VLAN > VLAN Configuration in the navigation panel and click the
1
Static VLAN Setup link.
C
H A PT ER
Initial Setup Example
GS1920 Series User's Guide
40
5