The Pppoe Screen; Pppoe Intermediate Agent - ZyXEL Communications GS1920-24 User Manual

28.2

The PPPoE Screen

Use this screen to configure the PPPoE Intermediate Agent on the Switch.
Click Advanced Application > PPPoE in the navigation panel to display the screen as shown.
Click Click Here to go to the Intermediate Agent screen.
Figure 170
28.3 PPPoE
Use this screen to configure the Switch to give a PPPoE termination server additional subscriber
information that the server can use to identify and authenticate a PPPoE client.
Click Advanced Application > PPPoE > Intermediate Agent in the navigation panel to display
the screen as shown.
Figure 171
The following table describes the labels in this screen.
Advanced Application > PPPoE > Intermediate Agent
Table 109
LABEL
Active
access-node-
identifier
Advanced Application > PPPoE Intermediate Agent
Intermediate Agent
Advanced Application > PPPoE > Intermediate Agent
DESCRIPTION
Select this option to enable the PPPoE intermediate agent globally on the Switch.
Enter up to 20 ASCII characters to identify the PPPoE intermediate agent. Hyphens (-) and
spaces are also allowed. The default is the Switch's host name.
GS1920 Series User's Guide
Chapter 28 PPPoE
234