Supported Radius Attributes; Attributes Used For Authentication - ZyXEL Communications GS1920-24 User Manual

describes the values you need to configure. Note that the bolded values in the table are fixed values
as defined in RFC 3580.
Table 88 Supported Tunnel Protocol Attribute
FUNCTION
VLAN Assignment
24.6.2

Supported RADIUS Attributes

Remote Authentication Dial-In User Service (RADIUS) attributes are data used to define specific
authentication elements in a user profile, which is stored on the RADIUS server. This appendix lists
the RADIUS attributes supported by the Switch.
Refer to RFC 2865 for more information about RADIUS attributes used for authentication.
This section lists the attributes used by authentication functions on the Switch. In cases where the
attribute has a specific format associated with it, the format is specified.
24.6.3

Attributes Used for Authentication

The following sections list the attributes sent from the Switch to the RADIUS server when
performing authentication.
24.6.3.1 Attributes Used for Authenticating Privilege Access
User-Name
- The format of the User-Name attribute is $enab#$, where # is the privilege level (1-14).
User-Password
NAS-Identifier
NAS-IP-Address
24.6.3.2 Attributes Used to Login Users
User-Name
User-Password
NAS-Identifier
NAS-IP-Address
24.6.3.3 Attributes Used by the IEEE 802.1x Authentication
User-Name
NAS-Identifier
NAS-IP-Address
NAS-Port
NAS-Port-Type
Chapter 24 AAA
ATTRIBUTE
Tunnel-Type = VLAN(13)
Tunnel-Medium-Type = 802(6)
Tunnel-Private-Group-ID =
Note: You must also create a VLAN with the specified VID on the Switch.
GS1920 Series User's Guide
198
VLAN ID