Arp Inspection Status - ZyXEL Communications GS1920-24 User Manual

Figure 153
The following table describes the labels in this screen.
Advanced Application > IP Source Guard > ARP Inspection
Table 96
LABEL
Total number of
filters
Index
MAC Address
VID
Port
Expiry (sec)
Reason
Delete
Cancel
Change Pages
25.7 ARP Inspection VLAN Status
Use this screen to look at various statistics about ARP packets in each VLAN.
click Advanced Application > IP Source Guard > ARP Inspection > VLAN Status.
Chapter 25 IP Source Guard
Advanced Application > IP Source Guard > ARP Inspection
DESCRIPTION
This field displays the current number of MAC address filters that were created because
the Switch identified unauthorized ARP packets.
This field displays a sequential number for each MAC address filter.
This field displays the source MAC address in the MAC address filter.
This field displays the source VLAN ID in the MAC address filter.
This field displays the source port of the discarded ARP packet.
This field displays how long (in seconds) the MAC address filter remains in the Switch.
You can also delete the record manually (Delete).
This field displays the reason the ARP packet was discarded.
MAC+VLAN: The MAC address and VLAN ID were not in the binding table.
IP: The MAC address and VLAN ID were in the binding table, but the IP address was
not valid.
Port: The MAC address, VLAN ID, and IP address were in the binding table, but the port
number was not valid.
Select this, and click Delete to remove the specified entry.
Click this to clear the Delete check boxes above.
Click Previous or Next to show the previous/next screen if all status information
cannot be seen in one screen.
GS1920 Series User's Guide
212
To open this screen,