ZyXEL Communications GS1920-24 User Manual page 123

Advanced Application > Spanning Tree Protocol > MSTP
Figure 94
The following table describes the labels in this screen.
Advanced Application > Spanning Tree Protocol > MSTP
Table 49
LABEL DESCRIPTION
Port Click Port to display the MSTP Port screen
Status Click Status to display the MSTP Status screen
Active Select this to activate MSTP on the Switch. Clear this to disable MSTP on the Switch.
Note: You must also activate Multiple Spanning Tree in the Advanced Application >
Chapter 13 Spanning Tree Protocol
Spanning Tree Protocol > Configuration screen to enable MSTP on the Switch.
GS1920 Series User's Guide
123
(see Figure 95 on page 125).
(see Figure 96 on page 127).