Configure Multiple Spanning Tree Protocol - ZyXEL Communications GS1920-24 User Manual

Advanced Application > Spanning Tree Protocol > Status: MRSTP (continued)
Table 48
LABEL
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last
Change
13.8 Configure
To configure MSTP, click MSTP in the Advanced Application > Spanning Tree Protocol screen.
See Section on page 114 for more information on MSTP.
Chapter 13 Spanning Tree Protocol
DESCRIPTION
This is the path cost from the root port on this Switch to the root switch.
This is the priority and number of the port on the Switch through which this Switch must
communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
This is the time since the spanning tree was last reconfigured.
Multiple Spanning Tree Protocol
GS1920 Series User's Guide
122