ZyXEL Communications GS1920-24 User Manual page 36

Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION
PoE Setup For PoE model(s)
This link takes you to a screen where you can set priorities so that the Switch is able to
reserve and allocate power to certain PDs.
Interface Setup This link takes you to a screen where you can configure settings for individual interface
type and ID.
IPv6 This link takes you to a screen where you can view IPv6 status and configure IPv6 settings.
Advanced Application
VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu). You can also configure a
protocol based VLAN or a subnet based VLAN in these screens.
Static MAC This link takes you to a screen where you can configure static MAC addresses for a port.
Forwarding These static MAC addresses do not age out.
Static Multicast This link takes you to a screen where you can configure static multicast MAC addresses for
Forwarding port(s). These static multicast MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent
Protocol network loops.
Bandwidth This link takes you to a screen where you can configure bandwidth limits on the Switch.
Control
Broadcast Storm This link takes you to a screen to set up broadcast filters.
Control
Mirroring This link takes you to screens where you can copy traffic from one port or ports to another
port in order that you can examine the traffic from the first port without interference.
Link Aggregation This link takes you to screens where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
Port This link takes you to a screen where you can configure IEEE 802.1x port authentication for
Authentication clients communicating via the Switch.
Port Security This link takes you to screens where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
Classifier This link takes you to a screen where you can configure the Switch to group packets based
on the specified criteria.
Policy Rule This link takes you to a screen where you can configure the Switch to perform special
treatment on the grouped packets.
Queuing Method This link takes you to a screen where you can configure queuing with associated queue
weights for each port.
Multicast This link takes you to screens where you can configure various multicast features, IGMP
snooping and create multicast VLANs.
AAA This link takes you to a screen where you can configure authentication, authorization
services via external servers. The external servers can be either RADIUS (Remote
Authentication Dial-In User Service) or TACACS+ (Terminal Access Controller Access-
Control System Plus).
IP Source Guard This link takes you to screens where you can configure filtering of unauthorized DHCP and
ARP packets in your network.
Loop Guard This link takes you to a screen where you can configure protection against network loops
that occur on the edge of your network.
Layer 2 Protocol This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling)
Tunneling settings on the Switch.
PPPoE This link takes you to a screen where you can configure intermediate agent settings in
port, VLAN, and PPPoE.
Chapter 4 The Web Configurator
GS1920 Series User's Guide
36