Installing your IP Phone 1230
This section details the steps and precautionary measures to perform
during IP Phone installation. The standard IP Phone 1230 package
includes the following accessories:
•
foot stand
•
handset
•
handset cord
•
2.1 m (7 ft.) CAT5 Ethernet cable
•
number plate and lens
Figure 4: Connections on the IP Phone 1230 on page 34
connections on an IP Phone 1230
CAUTION
Ensure that the protective rubber cap on
the Accessory Expansion Module (AEM)
port is in place when the port is not in use.
An improper connector can damage the IP
Phone. Consult your System administrator
for additional details.
Installing your IP Phone 1230
display the
33