8
Specifying the gateway transmission setting
1
In the "NETWORK SETTING" menu, press the [,] or [+] key until
"GATEWAY TX" is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and
then press the [OK] key.
–
Whether "DISABLE" or "ENABLE" is selected, the message
"ACCEPTED" appears, and then the "NETWORK SETTING" menu
appears again.
Note
The setting for gateway transmissions appears when optional fax kit
FK-506 is installed.
8-20
NETWORK SETTING
IP ADDRESS SETTING
DNS CONFIG.
GATEWAY TX
GATEWAY TX
GATEWAY TX
DISABLE
ENABLE
Network settings
IC-206