Power Save Mode - Konica Minolta IC-206 User Manual

6
4
Repeat step 3 as often as necessary until printing of the document is
finished.
Note
Be sure to load the paper into the manual bypass tray after the print
operation is performed from the computer. Follow the procedure
described below if the paper is loaded into the manual bypass tray before
the print operation is performed from the computer.
Remove the paper from the manual bypass tray.
Press the [Reset] key.
Press the [Printer] key.
Perform step 3 of the procedure.
Load the paper into the manual bypass tray one sheet at a time.
If the multi bypass tray (optional) is installed, printing from it can be
performed in the same way as with any other paper drawer since the
multi bypass tray can be loaded with 100 sheets of paper.
The multi bypass tray can be loaded with 10 envelopes, 20 OHP
transparencies, 20 postcards, 20 label sheets or 100 sheets of plain
paper.

Power Save mode

If print data is received while the machine is in Power Save mode, the mode
is canceled.
When print data is received, the data is printed after the machine has finished
warming up.
6-8
Control panel operations for printing functions
IC-206