Specifying The Gateway Transmission Setting - Konica Minolta PCL-400 User Manual

4
Press the [OK] key.
After the message "ACCEPTED" appears, the "NETWORK SETTING" menu
appears again.
5
Press the [Reset] key in the control panel.
– After the screen shown above appears, turn the machine off, then on again
to restart it.
Reminder
In order to apply the new settings, the machine must be turned off, then on again
to be restarted.

Specifying the gateway transmission setting

1
In the "NETWORK SETTING" menu, press the [,] or [+] key until "GATE-
WAY TX" is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and then
press the [OK] key.
7-14