Konica Minolta IC-206 User Manual page 321

Performing a scan to server (FTP) operation
– The remainder of the procedure differs depending on whether
"AUTO DETECTION" or "MANUAL" was selected.
!
Detail
Only FTP servers registered as speed dial numbers can be specified. FTP
server addresses can be registered as speed dial number by using
PageScope Web Connection. Refer to "Registering speed dial
destinations (FTP servers)" on page 9-19.
A notification of the FTP server address where the data was uploaded
can be sent to up to 10 specified recipients. When registering the speed
dial destination with PageScope Web Connection, select "E-mail
Notification". Refer to "Registering speed dial destinations (FTP servers)"
on page 9-19.
When "AUTO DETECTION" is selected
1
If "AUTO DETECTION" was selected in step 6 and the [OK] key is
pressed, the following screen appears.
2
Press the [OK] key.
The message "SCANNING" appears, and the following screen appears
when scanning is finished.
IC-206
300x300dpi TIFF 100%
TEXT/PHOTO
SCAN BOOK(AUTO)
SCAN=OK (SIZE=
300x300dpi TIFF 100%
TEXT/PHOTO
NEXT PAGE?(AUTO)
SCAN=OK (SEND=START)
)
1
11
11-9