Specifying The Lpd Setting - Konica Minolta IC-206 User Manual

8

Specifying the LPD setting

1
In the "NETWORK SETTING" menu, press the [,] or [+] key until "LPD
SETTING" is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and
then press the [OK] key.
– Whether "DISABLE" or "ENABLE" is selected, the message
"ACCEPTED" appears, and then the "NETWORK SETTING" menu
appears again.
8-22
NETWORK SETTING
LPD SETTING
SLP SETTING
SNMP SETTING
LPD SETTING
DISABLE
ENABLE
Network settings
IC-206