12
menu under "Maintenance" on the System tab; otherwise, the changes
to the settings will not be applied.
Network tab - LDAP Configuration
Specify the LDAP server information when an LDAP server is used for
searching for destinations.
%
To change the settings, specify the various settings, and then click the
[Apply] button.
Item
Server Address
Port Number
Enable SSL
Search Base
Attribute for Oper-
ation Panel
Attribute for Web
Tool
12-84
Description
Specify the LDAP server address. (maximum 64 characters)
Specify the port number (between 1 and 65535) to be used for communi-
cation with the LDAP server.
Select whether or not to use SSL/TLS to communicate with the LDAP serv-
er.
Specify the starting point for LDAP searches. (maximum 64 characters)
Specify the attribute for performing LDAP searches from the control panel.
(maximum 32 characters)
Specify the attribute for performing LDAP searches from PageScope Web
Connection. (maximum 32 characters)
Using PageScope Web Connection
IC-206