Network settings
Specifying the attribute setting
1
In the "LDAP SETTING" menu, press the [+] or [,] key until
"ATTRIBUTE" is selected, and then press the [OK] key.
2
Type in the attribute.
–
The attribute can contain a maximum of 32 characters.
–
For the attribute, consult with the network administrator.
–
If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "LDAP SETTING" menu
appears again.
IC-206
LDAP SETTING
SEARCH BASE
ATTRIBUTE
SEARCH METHOD
ATTRIBUTE
8
8-51