11
3
Press the [Speed Dial] key, and then use the keypad to type in the 3-
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).
–
When the destination address is entered, "OTHER SETTING=,"
appears. To change the transmission settings, such as the subject,
cc address or file format, press the [,] key. The "SCAN OTHER
SETTING" menu appears. For details on changing the transmission
settings, refer to "Changing the transmission settings" on
page 10-13.
–
Specify a speed dial number between 241 and 250.
–
If nothing is registered with the specified speed dial number, an
error message appears. Enter the correct speed dial number.
–
If the number was incorrectly entered, press the [Back] key, and
then type it in correctly.
4
Press the [OK] key.
The destination appears.
5
Press the [Start] key.
6
The "BOOK SCAN" menu appears. Press the [,] or [+] key until "AUTO
DETECTION" is selected, and then press the [OK] key.
11-8
Performing a scan to server (FTP) operation
300x300dpi TIFF 100%
TEXT/PHOTO
SPEED DIAL:250
-PRESS OK KEY-
BOOK SCAN
AUTO DETECTION
MANUAL:
IC-206