Peer-To-Peer Printing - Konica Minolta IC-206 User Manual

Network printing

Peer-to-peer printing

Compatible operating systems: Windows 98 SE/Windows Me
Reminder
Before specifying settings, check that the following preparations have
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(For details on installing the PCL driver, refer to "Installing the printer
driver by using the Add Printer Wizard" on page 3-18. If the GDI driver is
to be installed, refer to the user manual for the GDI printer controller,
included with this machine.)
1
On the Start menu, point to "Settings", and then click "Printers" to
open the Printers folder.
2
Right-click the icon for the installed printer.
3
Click "Properties" to open the Properties dialog box.
4
Click the Details tab, and then click the [Add Port] button.
5
Select "Other", and then select "Peer2Peer" from the "list of port
types".
6
Click the [OK] button.
7
Type in the IP address of this machine, and then click the [OK] button.
8
Click the [Apply] or the [OK] button.
IC-206
4
4-19