Konica Minolta IC-206 User Manual page 101

Network printing
Parameter
Password Retype
Preferred File Server
Preferred NDS Tree
Print Queue Scan Rate
*
Mode
Printer Number
Connection Mode
After changing the settings for parameters marked with an asterisk (
the machine off, then on again.
Specifying the NetWare 4.x/5.x/6 remote printer mode settings
1
Log on with Administrator privileges.
2
Start up NWadmin.
3
Select the organization performing the print service or the category
container, and then select "Print service quick setup" from the "Tools"
menu.
4
Type in the print server name, printer name, print queue name and
volume name, select "Remote parallel, LTP1" as the printer type, and
then save the specified settings.
– For queue user privileges, the printer notification option,
assignment of multiple queues, and passwords, refer to the
NetWare documentation, and specify settings as necessary.
5
Start up PageScope Web Connection, click the Network tab in
Administrator mode, select "NetWare Configuration", and then specify
the following settings for the copier.
– For details on using PageScope Web Connection, refer to "Using
PageScope Web Connection" on page 12-3.
6
From the NetWare Server console, load PSERVER.NLM.
7
From the NetWare Server console, display the printer server screen,
and check that the printer name entered in step4 is displayed for
Printer0 and that it is listed as "waiting for job".
IC-206
NDS
Specify only when setting from the NetWare Server.
Not necessary to specify
Name of the tree where Pserv-
er logs on
*
1 (Change as necessary.)
Pserver
1 (Change according to the setting.)
Directory Services
Bindery
Name of the file server that
connects to PServer
Not necessary to specify
Bindery
*
), turn
4
4-27