Lpr Printing - Konica Minolta IC-206 User Manual

4

LPR printing

Compatible operating systems: Windows 2000
Reminder
Before specifying settings, check that the following preparations have
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(For details on installing the PCL driver, refer to "Installing the printer
driver by using the Add Printer Wizard" on page 3-18. If the GDI driver is
to be installed, refer to the user manual for the GDI printer controller,
included with this machine.)
1
On the Start menu, point to "Settings", and then click "Printers" to
open the Printers folder.
2
Right-click the icon for the installed printer.
3
Click "Properties" to open the Properties dialog box.
4
Click the Ports tab, and then click the [Add Port] button.
5
In the Printer Ports dialog box, select "Standard TCP/IP Port", and then
click the [New Port] button.
6
After the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
7
Type the IP address of this machine into the "Printer Name or IP
Address" box, and then click the [Next] button.
8
Select "Custom", and then click the [Settings] button.
9
Select "LPR" in the protocol group box, type the queue name in the
"Queue Name" box of the "LPR Settings" group box, and then click the
[OK] button.
– Type in a queue name that begins with a letter (for example, "print").
4-20
Network printing
IC-206