Operation - Konica Minolta IC-206 User Manual

12
No.
4
5
6
7
Note
The Print tab appears only if the image controller IC-206 is installed.
The PageScope Web Connection pages appear differently depending on
the options installed on the machine and the specified machine settings.

Operation

In PageScope Web Connection, click a tab, select a function category, and
then click an item in the menu to display the available parameters.
For items that can only be viewed, check them in the Information and
settings pane.
For items where settings can be changed, change the settings in the
Information and settings pane.
The basic operation for changing settings consists of clicking a tab, selecting
the desired settings, then clicking the [Apply] button. Since the procedure for
changing the settings may differ depending on the parameter, refer to the
page containing the corresponding description for the parameter.
PageScope Web Connection is used in the same way that Internet Web
pages are viewed. Click page links to display those pages, or click the [Back]
(or [Forward]) button in the toolbar to display the previous (or next) page.
12-8
Item
Tabs
Menu
Information and settings
"Admin Password" box
Using PageScope Web Connection
Description
Click to select the desired category of settings. The fol-
lowing tabs appear in User mode.
System
Job
Print
Scan
Network
Information and settings for the selected tab are listed.
The menu that appears differs depending on the tab
that is selected.
Details of the item selected from the menu are dis-
played.
Type in the password to log on to the Administrator
mode.
IC-206