Network settings
Specifying the LDAP server address
1
Press the [Utility] key in the control panel.
2
Press the [,] or [+] key until "ADMIN. MANAGEMENT" is selected, and
then press the [OK] key.
3
Type in the administrator access code, and then press the [OK] key.
–
The manufacturer's default setting is "000000".
–
If the number was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
IC-206
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
ADMIN. MANAGEMENT
ADMIN. NO.:------
8
8-45