Specifying The Search Base - Konica Minolta IC-206 User Manual

8

Specifying the search base

1
In the "LDAP SETTING" menu, press the [+] or [,] key until "SEARCH
BASE" is selected, and then press the [OK] key.
2
Specify the database where the LDAP server is searched.
– The search base can contain a maximum of 64 characters.
– For the search base, consult with the network administrator.
– If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "LDAP SETTING" menu
appears again.
8-50
LDAP SETTING
SEARCH BASE
ATTRIBUTE
SEARCH METHOD
SEARCH BASE
Network settings
IC-206