Konica Minolta IC-206 User Manual page 411

Using PageScope Web Connection
Item
Search Method
Timeout
Maximum Search
Results
Authentication
Method
LDAP Account
Password
Domain Name
Reminder
To change the settings on the Network tab, click the [Apply] button, and
then, after "Updated Successful" appears, click the [Reset] button on the
page that appears after clicking "NIC and Printer Controller Reset" in the
menu under "Maintenance" on the System tab; otherwise, the changes
to the settings will not be applied.
Note
An address search using the LDAP server can be performed from the
Scan tab of PageScope Web Connection.
For the attributes to be specified for "Attribute for Operation Panel" and
"Attribute for Web Tool", consult with the network administrator.
IC-206
Description
Specify the condition for performing LDAP searches. Select "Begin",
"Contain" or "End" for the item in the search base.
Specify the amount of time (between 5 and 300 seconds) until an LDAP
search times out.
Specify the maximum number of items (between 5 and 100) that can be
received as LDAP search results.
Select the LDAP authentication method. The settings that can be specified
differ depending on the selected authentication method. If "anonymous" is
selected, it is not necessary to specify the domain name, logon name and
password.
If any setting other than "anonymous" is selected as the authentication
method, type in the name of the LDAP account. (maximum 255 characters)
If any setting other than "anonymous" is selected as the authentication
method, type in the password. (maximum 32 characters)
Specify the necessary domain name used to connect to the LDAP server.
(maximum 64 characters)
12
12-85