Analog Extension Specifications; Telephone Line Specifications; Dimensions - Fortinet FortiVoice FVC Series Hardware Manual

Analog extension specifications

Connector type
Trunk type
Interface impedance
Loop range
Flash supported
On-hook voltage
Off-hook loop voltage source
Off-hook loop current
Dial tone level
Ringing voltage
Ringing frequency
Total ringing load
Devices designed to respond to particular ringing cadences may not respond when used with this equipment.

Telephone line specifications

Connector type
Trunk type
Interface impedance
Ringing impedance
Ringing sensitivity
REN
Longitudinal balance
Signal level
Distinctive ring supported
Caller ID support

Dimensions

Metric (mm)
Imperial (inches)
Specifications
RJ-11, 2-pin
Loop start
Either 600 , 900 , TBR21, BT complex, AU complex or ZA
complex, depending on region.
0–600 
Yes
35 V
35 V
23 mA to 40 mA
-2.4 dBm
90 V RMS
20 Hz or 25 Hz (depending on region) – True sine wave
5 REN
RJ-11, 2-pin
Loop start
Configurable, 600 , 600 complex, 900 , 900 complex
3,900 
45 V RMS @ 20 Hz or 25 Hz (depending on region)
0.7 B
69 dB
-10 dB
Yes
FSK, all lines
75 x 216 x 216
3 x 8.5 x 8.5
Page 4 FortiVoice FVC Hardware Specification Guide