Configuring Ports - HP PROCURVE 2520 Management And Configuration Manual

Table 10-2. Protocols and Modes Supported for Copper Ports
Modes
Auto
10HDx
100HDx
10FDx
100FDx
Auto-10
Table 10-3. Protocols and Modes Supported for Fiber Optic Ports
Protocols
Modes

Configuring Ports

You can configure and view the port settings by using the menu.
N o t e
The menu interface uses the same screen for configuring both individual ports
and port trunk groups. For information on port trunk groups, refer to Chapter
12, "Port Trunking" .
1.
An example of the Menu display is shown below.
10/100 Mbps
10/100 TX
Settings
100FDx
10HDx
100HDx
10FDx
100FDX
10FDX
100 Mbps
100BASE-FX
100BASE-BX10
100HDx
100FDx
From the Main Menu, Select:
2. Switch Configuration...
2. Port/Trunk Settings
Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Gigabit
10/100/1000-T
Modes
Auto 1000FDx
Auto-10 10HDx
Auto-100 100FDx
Auto-10-100 100FDx
Auto-1000 1000FDx
10HDx 10HDx
100HDX 100HDx
Gigabit
1000BASE-SX
1000BASE-LX
1000BASE-BX10
1000BASE-LH
Auto
1000FDx
Settings
10-7