Viewing The Mac Addresses Of Connected Devices - HP PROCURVE 2520 Management And Configuration Manual

MAC Address Management

Viewing the MAC Addresses of Connected Devices

Viewing the MAC Addresses of
Connected Devices
Syntax: show mac-address [ | mac-addr |
To list the MAC addresses of devices the switch has detected, use the show
mac-address command.
Figure B-6. Example of show mac-address Command
D-6
Lists the MAC addresses of the devices the switch has detected,
along with the number of the specific port on which each MAC
address was detected.
[ port-list ]
Lists the MAC addresses of the devices the switch has detected, on
the specified port(s).
[ mac-addr ]
Lists the port on which the switch detects the specified MAC
address. Returns the following message if the specified MAC
address is not detected on any port in the switch:
MAC address < mac-addr > not found.
[ vlan < vid > ]
Lists the MAC addresses of the devices the switch has detected on
ports belonging to the specified VLAN, along with the number of
the specific port on which each MAC address was detected.
ProCurve(config)# show mac-address
Status and Counters - Port Address Table
MAC Address Located on Port
------------- -------------- -
00000c-07ac00 1