Using the Menu and Web Browser Interfaces To Implement Configuration Changes
value will appear in the menu interface display for that parameter. However,
as indicated above, unless you also make a configuration change in the
menu interface, only the
the change to the startup-config file.
How To Reset the startup-config and running-config Files to the
Factory Default Configuration. This command reboots the switch,
replacing the contents of the current startup-config and running-config files
with the factory-default startup configuration.
Syntax:
For example:
ProCurve(config)# erase startup-config
Configuration will be deleted and device rebooted, continue [y/n]?
Figure 6-3. Example of erase startup-config Command
Press
to replace the current configuration with the factory default config
[y]
uration and reboot the switch. Press
prevent a reboot.
Using the Menu and Web Browser
Interfaces To Implement Configuration
Changes
The menu and web browser interfaces offer these advantages:
■
Quick, easy menu or window access to a subset of switch configuration
features
■
Viewing several related configuration parameters in the same screen, with
their default and current settings
Immediately changing both the running-config file and the startup-config
■
file with a single command
write memory
erase startup-config
[n]
Switch Memory and Configuration
command in the CLI will actually save
to retain the current configuration and
6-9