Sntp: Viewing, Selecting, And Configuring - HP PROCURVE 2520 Management And Configuration Manual

Time Protocols

SNTP: Viewing, Selecting, and Configuring

■
■
SNTP: Viewing, Selecting, and
Configuring
SNTP Feature
view the SNTP time synchronization configuration
select SNTP as the time synchronization method
disable time synchronization
enable the SNTP mode (Broadcast, Unicast, or Disabled)
broadcast
unicast
none/disabled
configure an SNTP server address (for Unicast mode only) none
change the SNTP server version (for Unicast mode only)
change the SNTP poll interval
change the server priority
9-4
In the System Information screen of the Menu interface, set the Time
Synch Method parameter to None, then press [Enter], then [S] (for Save).
In the Global config level of the CLI, execute no timesync.
Default Menu
n/a page 9-5
timep page 9-6
timep page 9-6
disabled
n/a page 9-6
n/a page 9-6
n/a page 9-6
page 9-6
3 page 9-7
720 seconds page 9-7
n/a —
CLI Web
page 9-8 —
page 9-10 ff. —
page 9-14 —
—
page 9-11 —
page 9-12 —
page 9-15 —
page 9-12 ff. —
page 9-13 —
page 9-14 —
page 9-12 —