HP PROCURVE 2520 Management And Configuration Manual page 160

Interface Access and System Information
System Information
Configure a System Name, Contact, and Location for the Switch. To
help distinguish one switch from another, configure a plain-language identity
for the switch.
Syntax: hostname < name-string >
Each field allows up to 255 characters.
For example, to name the switch "Blue" with "Ext-4474" as the system contact,
and "North-Data-Room" as the location:
ProCurve(config)# hostname Blue
Blue(config)# snmp-server contact Ext-4474 location North-Data-Room
Blue(config)# show system information
Status and Counters - General System Information
System Name
System Contact
System Location
MAC Age Time (sec) : 300
Time Zone
Daylight Time Rule : None
Software revision
ROM Version
Up Time
CPU Util (%)
IP Mgmt - Pkts Rx : 1,611,997
Pkts Tx : 2109
Figure 7-9. System Information Listing After Executing the Preceding Commands
The menu interface will only display up to 47 characters although you can
specify a name up to 255 characters in length. A message beginning with "+"
displays if the name exceeds 47 characters. You can use the CLI show running,
show config, or show system information commands to see the complete text.
The menu interface is shown in Figure 7-10.
7-14
snmp-server [contact <system-contact>] [location <system-location>]
: Blue
: Ext-4474
: North-Data-Room
: 0
: S.14.XX
: S.14.02
: 5 days
: 5
Base MAC Addr
Serial Number
Memory - Total
Free
Packet - Total
Buffers
Free
Lowest
Missed
New hostname, contact,
and location data from
previous commands.
: 001ffe-74b3e0
: ff ff ff ...
: 33,554,432
: 24,718,392
: 3022
: 2510
: 2312
: 0