HP PROCURVE 2520 Management And Configuration Manual page 220

Hewlett-packard switch user manual

Hide thumbs Also See for PROCURVE 2520:

Table of Contents

Port Status and Configuration

Viewing Port Status and Configuring Port Parameters

ProCurve(config)# show interfaces config

Port Settings

----- --------- + ------- ------------ --------- ----

Figure 10-4. Example of a show interfaces config Command Listing

The display option can be used to initiate the dynamic update of the show

interfaces command with the output being the same as the show interfaces

command. When using the display option in the CLI, the information stays on

the screen and is updated every 3 seconds, as occurs with the display using

the menu feature. The update is terminated with Cntl-C.

You can use the arrow keys to scroll through the screen when the output does

not fit in one screen.

Syntax: show int display

For example:

| Enabled Mode

Initiates the dynamic update of a command. The output is the

same as the equivalent "show" command.The information is

updated every 3 seconds.

Note: Select "Back" to exit the display.

ProCurve# show int display

Flow Ctrl MDI

Show Quick Links

Chapters

Table of Contents