Saving Show Tech Command Output To A Text File - HP PROCURVE 2520 Management And Configuration Manual

Troubleshooting
Viewing Switch Configuration and Operation
Figure C-19 shows sample output from the show tech command.
ProCurve# show tech
show system
Status and Counters - General System Information
System Name
System Contact
System Location
MAC Age Time (sec) : 300
Time Zone
Daylight Time Rule : None
Software revision
ROM Version
Up Time
CPU Util (%)
IP Mgmt - Pkts Rx : 759
Pkts Tx : 2
show flash
Image Size(Bytes)
----- ----------
Figure C-19. Example of Show Tech Command

Saving show tech Command Output to a Text File

When you enter the show tech command, a summary of switch operational
data is sent to your terminal emulator. You can use your terminal emulator's
text capture features to save the show tech data to a text file for viewing,
printing, or sending to an associate to diagnose a problem.
For example, if your terminal emulator is the Hyperterminal application
available with Microsoft® Windows® software, you can copy the show tech
output to a file and then use either Microsoft Word or Notepad to display the
data. (In this case, Microsoft Word provides the data in an easier-to-read
format.)
C-60
: ProCurve
:
:
: 0
: S.14.XX Base MAC Addr
: S.12.12 Serial Number
: 23 hours Memory
: 10
Packet
Buffers
Date Version
-------- -------
: 001871-c42f00
: SG641SU00L
- Total :
Free :
- Total : 6750
Free : 5086
Lowest : 4961
Missed : 0
Build #
-------