HP PROCURVE 2520 Management And Configuration Manual page 153

ProCurve(config)# show telnet
Telnet Activity
--------------------------------------------------------
Session : ** 1
Privilege: Manager
From : Console
To :
-------------------------------------------------------
Session : ** 2
Privilege: Manager
From : 12.13.14.10
To : 15.33.66.20
-------------------------------------------------------
Session : ** 3
Privilege: Operator
From : 2001:db7:5:0:203:4ff:fe0a:251
To : 2001:db7:5:0:203:4ff1:fddd:12
Figure 7-3. Example of show telnet Command Displaying Resolved IP Addresses
Reconfigure Web Browser Access. In the default configuration, web
browser access is enabled.
Syntax: [no] web-management
Enables or disables web browser access.
management-url: Specify the URL for the web interface button
plaintext: Enable/Disable the http server (secure).
ssl: Enable/Disable the https server (secure)
support-url: Specify the URL the web interface support page
To disable web browser access:
ProCurve(config)# no web-management
To re-enable web browser access:
ProCurve(config)# web-management
Interface Access and System Information
Interface Access: Console/Serial Link, Web, and Inbound Telnet
7-7