Configuring The Administrator Settings; Administrator Tab; Reset Settings Tab - Ricoh SP 330SN User Manual

Configuring the Administrator Settings

Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], [Energy Saver Mode], and [PCL6 Mode].

Administrator Tab

Administrator Settings
Item
Change Password
(only when using the
touch panel model)
New Password
Confirm New Password Enter the same password again, to confirm.
Change E-mail Address
(only when using the
touch panel model)
Administrator E-mail
Address (only when
using the touch panel
model)

Reset Settings Tab

Reset Settings
Item
Reset Network Settings
Reset Menu Settings
Clear Scan Destination
Check this to configure the administrator password.
Enter the new administrator password. Can contain up to 16 characters.
Check this to configure the administrator e-mail address.
Enter the administrator e-mail address.
If the machine's e-mail address is not configured in the [SMTP] page, this
address will be used as the sender's address of e-mails sent from this
machine, such as notification e-mails. Can contain up to 64 characters.
Select to restore settings configured under the [Network Settings] and
[Administrator Tools].
Select to restore settings that are not related to the network to their defaults.
Select to clear the scan destinations.
Configuring the Administrator Settings
Description
Description
363